This mount allows you to rigidly attach your Garmin Varia RCT715/716 (the bigger one with the camera) to your bike's seat post. Please select your Canyon bike model from the list and then decide if you want to add the QTLL or not.
The mount uses the standard quarter turn lever lock (QTLL) designed for the Garmin camera unit. We sell 2 versions for each seat post type. One with the QTLL pre installed or you can choose to save a few bucks by reusing the QTLL that came with your Garmin. If you share your camera unit on more than one bike, then you should order your second mount with the QTLL.
This is one of the lightest and most aerodynamic mounts on the market! This product was proudly designed and manufactured in the USA. It is precision printed with fiber reinforced nylon that makes it both durable and flexible. The matte black finish looks great on any bike.
Each unit comes neatly boxed in plastic-free packaging and includes a 2mm hex wrench and extra stainless steel screws (because those things are easy to lose when you drop them).
See sheehylabs.com for other bike brands or to mount the Garmin Varia without the camera.
This unit is only compatible with the Garmin Varia RCT/715/716 - the one with the camera and is designed specifically for Canyon bicycles. Please select your bike model from the drop down list. If you are unsure of what model you need, please email us at support@sheehylabs.com
Screws: Low profile M3 x 10mm hex head stainless
If you are unsure of what model you need, use the table below to double check your seat post dimensions.
Easy to install. No need to remove your seat post! Just remove the two preinstalled stainless screws using the included 2mm allen wrench, open the mount and wrap it around the seat post. You might have to give it a bit of squeeze to line up the screws with the holes - they go in at a 45 degree angle which provides excellent clamping strength. Tighten the mount until the gap is closed and then tighten some more to ensure the mount doesn't slide on the post. The mount will not break, but be careful not to strip the head of the screws. Try not to use a ball-end allen key as they don't work well with the small screws. Installation takes about a minute!
We strive for 100% customer satisfaction and our customer reviews back up our commitment. If you ever have a problem with your mount then please email us at support@sheehylabs.com. We will make it right.
